Home Master Assembled Reverse Osmosis Membrane | Mem-TFC50 | Mem-TFC75 | MemTFC100

Membrane with Housing and fittings Assembled

Details

SKU

MH-50

Weight

2.00 lbs

Our price:

$99.95

Options


RO Membrane
Add Filters
Tubing
Automatic Shutoff Valve?
Full Contact Hardware?
Permeate Pump Present?

Qty

Ask a question about this product

Membrane Housing with Membrane and Fittings -- Fully Assembled

Home Master reverse osmosis membrane housing with premium reverse osmosis membrane, 1/4" stainless steel check valve, flow restrictor, 1/4" drain fitting, and 1/4" inlet fitting -- fully assembled.

Time To Change your RO Membrane?
Has it been 3-5 years?

Simplify your membrane change service -- order this replacement RO membrane pre-assembled in the membrane housing with your replacement filter change set

Its like getting a brand new purification unit .

Overview of Options:

RO Membrane - Replacement RO membrane for your Home Master® Reverse Osmosis System.

Dow Filmtec 50 gpd 98% NaCL removal*

Dow Filmtec 75 gpd 99% NaCL removal - best for harder water*

Dow Filmtec 100 gpd 98% NaCL removal*

CSM Brand 150 gpd 93% NaCL removal - best for low pressure*

Add Filters - Select desired model/filters for a complete refresh of your Home Master® Reverse Osmosis System to ensure the best possible water quality. UV, Ultra, and HydroPerfection also get a new UV Filter housing and bulb.

Automatic Shutoff Valve?

Add a fresh, new automatic shutoff valve for a simpler installation.
Alternatively, select "Customer Reuse Existing DIY" and transfer your existing ASV to the new cluster when it arrives at your home. The tubing will be configured to accept your ASV.
Select "Not Present / Remove" if you do not have an ASV (HydroGardener Pro) or do not want one.

Full Contact Hardware?

Add new Full Contact hardware with your Artesian or HydroPerfection System for a simpler installation.
Alternatively, select "Customer Reuse Existing DIY" and transfer your existing Full Contact hardware to the new cluster when it arrives at your home. The tubing will be configured to accept your Full Contact hardware.
Select "Not Present / Remove" if you do not have or want Full Contact hardware.

Permeate Pump Present?

Add a new Permeate Pump to reduce water waste, increase production, and reduce TDS creep.
Alternatively, select "Customer Reuse Existing DIY" and transfer your existing Permeate Pump to the new cluster when it arrives at your home. The tubing will be configured to accept your Permeate pump.
Select "Not Present / Remove" if you do not have or want a Permeate Pump.

Tubing - Upgrade your Home Master® Reverse Osmosis System with Biosafe Antimicrobial Tubing. Designed to inhibit microbial colonization on the tubing's inner surface; this tubing prevents the formation of biofilm and polymer slime that can cause poor taste, odors, and material degradation.

*General Operating Conditions
Feed water: PSI 40 - 100 PSI
Feed water Temperature: 40˚ - 100˚F
Max. Total Dissolved Solids (TDS): 2000 ppm
pH limits: 4 - 10
* Your results may vary depending on regular maintenance, general condition of unit, and initial water supply. Filter not designed to treat microbially unsafe or non-potable water with out adequate disinfection before and after unit.